This is a detailed tutorial with screenshots. Many of you probably have old photos lying in a drawer or shoebox.
The first thing you should do if you intend to digitize these images, is to clean the surface of the images before scanning them. It’ll save you a lot of post-processing later. For this tutorial I’ve scanned a typical summer photo and I’ll restore the photo using Photoshop.
These are the exact same techniques that I used in my previous post with the sexy beast that was eating ice cream.
- Open your scanned photo in Photoshop.
- Via the top menu you choose window – histogram. OR: click on the histogram symbol like shown in illustration 01 -find histogram.
- Look at each color channel (RGB – Red Green Blue).Click on the little icon up in the right corner (marked red in illustration 2) and choose the option “All channel view”.
This image is not too bad, but if you don’t know what to look for please have a look at the red circles in illustration 01: these are the problem areas and you want to get rid of some of the gaps.
So how do we solve this?
- Add a levels layer from the layers palette (illustration 3)
- Work on the color channels one by one. First adjust the red channel (click on RGB where it says channel and you’ll get a drop down menu with the individual channels – just above the histogram in illustration 3).Hold the Alt-button and move the black slider (or the white one – depending on your photo – illustration 4) untill you see a little bit of color, then pull it back so that the color disappears.
- Use the same technique on the green channel,
- and on the blue channel (illustration 04)
That’s it! The colors should now look better.
Removing dust, scratches and color spots
This photo is pretty decent, but there are some minor problems with dust, scratches & color spots and we probably don’t want this to ruin our old family photos…
The first thing you do is to copy your photo layer by dragging it onto the new layer in the layers palette (illustration 7).
Remember to always make sure that you’re working on your copied layer and not the original. Like in illustration 07: in the layers palette the layer that you’re working on is marked blue. By default it’s named “Background copy” since you’ve just copied it.
There are several methods to remove dust, scratches & color spots. I’ll show you two of the alternatives. Often it’s a good idea to combine these two methods.
- Top menu – filter – noise – dust & scratches (see illustration 8)
- change the radius and the threshold (illustration 09).
Note: If the threshold is too low, the image will be softened (this can also be used as an effective wrinkle remover). In my case I set the threshold to about 28 and kept the radius at 3, but you’ll have to find the best setting for your image. Feel free to experiment!
You can click inside the little preview window and move your image around in there to see the effects before you apply them.
- Choose the healing brush tool (illustration 10) and choose a small brush size with a soft edge.
- ALT-click on your image somewhere near the place with scratches.
By Alt-clicking you sample some of the image information, so you want to Alt-click somewhere that has the same color that you want to re-produce. (I wanted to fix the forest on this photo, so I made sure to sample the forest).
- Now let go of the Alt-button and brush over the scratch.
Remember to Alt-click and sample often. Make sure you clean up all the details.
If you want to zoom in on your photo while working in Photoshop: hold CTRL and + (to zoom in) or CTRL and – (to zoom out).
You can also use the clone stamp tool with this same method (sampling by Alt-clicking), but the clone-stamp tool creates a clone of the area that you’ve Alt-clicked.
Often it’s necessary to switch and use both these tools – and both techniques (alternative 1 & 2) – on an image.
Combining Alternative 1 & 2 will make the process quick, but again: it all depends on your original photo and which kind of damages that you want to repair. Like I’ve already mentioned: This photo wasn’t that worn out and didn’t have a lot of damage. The colors weren’t too retarded either.
The next step was to crop the photo to get rid of the small part with the boat (illustration 13).
As a final touch I added a brightness/contrast layer where I decreased the brightness and increased the contrast.
When you’re satisfied, flatten the image and save as a .jpg, .tiff (or whichever file format it is that you prefer).
- Enjoying ice cream – scanned and restored photo (cardinalguzman.wordpress.com)
- The Alligator – lens blur effect (cardinalguzman.wordpress.com)
- Blogging-tips: crop & resize your photos (cardinalguzman.wordpress.com)
- Check out Mike Hardistry’s creative photoshop tutorial on brushes (mikehardisty.wordpress.com)
- Photoshop: Sharpen with High Pass (cardinalguzman.wordpress.com)
I hope this tutorial was helpful! Here’s all these photos (plus some) in a gallery: